Electric ceramic cutters

Tile Cutting Machine 500W

GÜDE Radial tile cutter RFS 300 with portable ground fault circuit interrupter (GFCI)

• With it, you can bring your ceramics, wall and floor tiles to size, the tile cutter is characterized by its large cutting length of 1020 mm.
• The rubberised workspace that minimizes the risk of slipping while cutting the tiles, including the practical auxiliary table which can be mounted at different positions of the base frame.
• The 2-pc. Working surface can be removed in no time, which facilitates cleaning of the water pan a lot.
• The diamond disk is cooled by a separate pump in operation
• Тhe dust produced when cutting is bound by the water immediately
• Features:
  • 7-fold Ball bearing motor assembly
  • Powerful coolant pump
  • Additional table
  • Extra large parallel and miter
  • Rubberized worksurface
  • Splash protection made ​​of rubber
  • Guide rail with adjustable cutting limit
  • Removable stands
  • Suspension and drain plugs for the water bath.
• Technical data:
  • Connection: 230 V ~ 50 Hz 
  • Protection: IP 54 
  • Motor power: 1.5 kW S2 20 min. 
  • Idle speed: 2900 rpm 1 
  • Wheel size: 300 x 25.4 mm 
  • Max. Cutting height 90 °: 66 mm 
  • Max. Cutting height 45 °: 46 mm 
  • Max. Cutting length: 1020 mm 
  • Table size: 1060 x 468 mm 
  • Additional table: 230 x 175 mm 
  • Miter: 0 - 45 ° 
  • Tank capacity: 50 L
  • Noise value statement: LWA 108 dB 
  • Dimensions L x W x H: 1655 x 770 mm X1170 
  • Net / gross weight 50.2 kg / 61 kg

GÜDE Tile cutter GF180 with Powerful induction motor and residual current circuit breakers for optimum safety

• Portable and rugged tile cutter.
• Amenities:
  • Diamond cutting disc 180 mm
  • Diagonal cutting gauge
  • Rip fence with handy clamp screws
  • Inserted scales integrated in the table
  • Water vessel
  • Applications - ideal for construction sites or interior design.
• Technical data:
  • Power: 600 W / S2: 30 min 
  • Voltage: 230 V 
  • Frequency: 50 Hz 
  • No-load speed: 2950 min^-1 
  • Diamond blade ø: 180 mm x 25.4 mm 
  • Table size: 330 mm x 360 mm 
  • Cutting height max .: 34 mm 
  • Noise declared value LWA : 104.8 dB 
  • Weight: 9 kg

• The new line of wet saws Brooklyn F1 by Montolit presents an advantageous correlation between the powerful engine 2.2 Kw and the small diameter diamond blade 250mm, which guarantees high-ranking performances.
• Frame made of aluminum.
• Folding legs.
• Water pump supplying water to the disc present hose.
• Multi-stage handle with the ability to cut diagonally.

• Motor: 230V / 50Hz
• Power: 2200W - 3Hp
• Idle speed: 2800 rpm
• Diamond disk Ø250 mm, inner diameter Ø25.4 mm
• Linear cutting: 131 cm
• Diagonal cutting diameter: 45 x 92 cm
• Thickness of cut to: 0-5 cm
• Weight: 85.00 kg

GÜDE Radial tile cutter with aluminum-stop

• Full ball bearings
• 4-fold with cooling water pump and water trough saw unit
• Guide rail
• 45° swivel for miter cuts
• Max. Tile Size (diagonal) 300 mm x 300 mm
• Max. Cutting length approx 420 mm
• Incl. Diamond wheel
• With integrated GFCI circuit breaker (integrated personal protection switch for optimal protection).
• Technical data:
  • Connection: 230 V / 50 Hz, 
  • Motor power: 600 W (P1) 
  • Speed: 3000 U / min 
  • Max. Cutting length: 420 mm 
  • Max. Tile size: 300 x 300 mm (diagonal) 
  • Max. Cutting height: 25 mm (90 °) 15 mm (45 °) 
  • Wheel size: 180 x 25.4 mm 
  • Table size approx: 465 x 385 mm 
  • ​​Machine dimensions: 760 x 570 x 920 mm 
  • Tank capacity: 10 l 
  • Net / gross weight: 24.00 kg

GÜDE Radial tile cutter with aluminum-stop

• Full ball bearings
• 4-fold with cooling water pump and water trough saw unit
• Guide rail
• 45° swivel for miter cuts
• Max. Tile Size (diagonal) 360 mm x 360 mm
• Max. Cutting length approx 520 mm
• Incl. Diamond wheel
• With integrated GFCI circuit breaker (integrated personal protection switch for optimal protection).
• Technical data:
  • Connection: 230 V / 50 Hz, 
  • Motor power: 800 W 
  • Speed: 3000 U / min 
  • Max. Cutting length: 520 mm 
  • Max. Tile size: 360 x 360 mm (diagonal) 
  • Max. Cutting height: 30 mm (90 °) 25 mm (45 °) 
  • Wheel size: 200x25,4 mm 
  • Table size approx: 790x390 mm 
  • ​​Machine dimensions: 830 x 450 x 920 mm 
  • Tank capacity: 10 l 
  • Net / gross weight: 27.7 kg / 30 kg

Scheppach Wet tile saw FS4700, 1200 W

• Moving cutting head with tilt, for clean, precise, straight cuts and mitres
• Induction motor with thermal protection
• Cutting lenght: 1200 mm
• Cutting height: 40 mm
• Steel construction
• Two guide rails
• Precise cutting laser guide
• Foldable legs
• Wheels for easy transportation
• Two integrated working tables expand as needed, to give full support even at the largest tiles
• Technical data:
  • ​Dimensions L x W x H: 1845 x 440 x 1155 mm
  • Table dimensions: 1377 x 400 mm
  • Cutting disc diameter: 230 mm
  • Water: 40 L.
  • Cutting height 90^o: 40 mm
  • Cutting height 45^о: 34 mm
  • Power: 1200 W
  • Weight: 57 kg

Scheppach Wet tile saw FS3600, 900 W with induction motor with thermal protection

• Moving cutting head with tilt, for clean, precise, straight cuts and mitres
• Induction motor with thermal protection
• Cutting lenght: 920 mm
• Cutting height: 36 mm
• Steel construction
• Two guide rails
• Precise cutting laser guide
• Foldable legs
• Wheels for easy transportation
• Two integrated working tables expand as needed, to give full support even at the largest tiles
• Technical data:
  • ​Dimensions L x W x H: 1560 x 440 x 1140 mm
  • Table dimensions: 1290 x 400 mm
  • Cutting disc diameter: 200 mm
  • Bore: 25.4 mm
  • Water: 30 L.
  • Cutting height 90^o: 36 mm
  • Cutting height 45^о: 29 mm
  • Power: 900 W
  • Weight: 51 kg

• Cutting height up to 110 mm for all materials
• Work table with 4-fold ball bearing guide and non-slip rubber mat
• Cutting length max .: 800 mm
• Stepless, tiltable saw head: from 0 ° to 45 °
• Integrated water pump for cooling water delivery
• 1 diamond blade Ø 350 x 25.4 mm
• Base frame retractable, and driving device for easy transport
• Angle stop with degree adjustment

Technical specifications

• Dimensions L x W x H: 1200 x 600 x 1260 mm
• Table size: 530 x 430 mm
• Cutting disc Ø: 350 mm
• Cutting height at 90 °: max. 110 mm
• Cutting height at 45 °: max. 72 mm
• Motor: 230V ~
• Motor power: 2000 W (S6 40%)
• Motor speed 2800 1/min
• Weight net / gross: 72/90 kg

• This floor pliers is a practical tool for tiling installation, helping to install floor tiles quickly and easily.
• Made of high quality PP+ electroplated iron, sturdy and durable in use.
• Plastic handle is comfortable to hold and use.
• Made to provide high precision and comfort during tile installation process.
• Ergonomic design helps to speed up tile installation.
• Material: PP+ electroplated iron
• Color: blue
• For tile thickness are between 3~16mm
• Suitable for tile gap: 1~2mm
• Quantity: 1pc

• Features:
• Manufacturer Mannesmann Germany. 
• Spare diamond cutting disc for M 631-500 Electric Tile Cutter.
• Size: Ø 180 mm x 2,2 x Ø 25,4 mm

• For all drilling machines
• Working range: 30 - 120 mm
• The set includes 2 hardened knives, punch and leading drill 7 mm